Product ID:SIKATOP 121 MORTAR/BINDER
MSDS Date:03/22/1985
FSC:5610
NIIN:00N009858
MSDS Number: BCTKZ

SIKA CORPORATION

875 VALLEY BROOK AVENUE
LYNDHURST, NJ 07071

Emergency Phone: 800-424-9300

Info Phone: 201-933-8800

Cage: OPMN0

SIKA CORPORATION

LYNDHURST, NJ 07071

Telephone: 800-424-9300

Cage: OPMN0

NO REPORTABLE HAZARDOUS INGREDIENTS ACCORD.TO

Fraction By Weight: Fraction by Wt

OSHA PEL N/K

ACGIH TLV: N/K

PORTLAND CEMENT

CAS: 65997-15-1

RTECS: VV8770000

Fraction By Weight: 48%

OSHA PEL 15 MG/M3 TDUST

ACGIH TLV: 10 MG/M3 TDUST; 9293

LD50 LC50 Mixture:NOT KNOWN
Routes of Entry: Inhalation:YES Skin:YES Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:SEE SIGNS AND SYMPTOMS OF OVEREXPOSURE
SECTION .
Explanation of Carcinogenicity:NOT KNOWN
Effects of Overexposure:SIKATOP 121, IN CERTAIN CASES,CAN CAUSE SKIN
IRRITATION.
Medical Cond Aggravated by Exposure:NONE

First Aid:EYES:IMME FLUSH W/LGE AMTS OF WTR FOR AT LEAST 15 MIN &
CONSULT A DOCTOR. SKIN:WASH THOROUGHLY W/WTR.INGESTION:CALL MD IMME
. INHALATION:REMOVE FROM EXPOSURE. SUPPORT BREATHING (GIVE O*2/
ARTIFICIAL RESPIRATION).

Flash Point:N/APPLICABLE
Lower Limits:N/APPLICABLE
Upper Limits:N/K
Unusual Fire/Explosion Hazard:NONE

Spill Release Procedures:SWEEP/ACUUM UP SPILLS, FOR "A" COMPONENT
DILUTE W/H2O.
Neutralizing Agent:NOT KNOWN

Handling and Storage Precautions:KEEP IN DRY, COOL PLACE. PROTECT
COMPONENT A FROM FREEZING.
Other Precautions:NOT KNOWN .

Respiratory Protection:USE NIOSH/MSHA APPROVED DUST MASK RECOMMENDED.
Ventilation:NOT APPLICABLE
Protective Gloves:RUBBER
Eye Protection:SAFETY GOGGLES
Other Protective Equipment:NONE
Work Hygienic Practices:NONE
Supplemental Safety and Health
PH:N.FL PT MTD:N.SPEC GRAVITY:COMPON A:1.02,COMPON B:N/A.

Boiling Pt:B.P. Text:N/APPLICABL
Melt/Freeze Pt:M.P/F.P Text:N/K
Decomp Temp:Decomp Text:N/K
Vapor Pres:
Vapor Density:
Spec Gravity:N/K
pH:N/K-FP
Solubility in Water:NOT KNOWN
Appearance and Odor:NOT KNOWN
Corrosion Rate:

Stability Indicator/Materials to Avoid:YES
Stability Condition to Avoid:COMPONENT A FROM FREEZING
Conditions to Avoid Polymerization:COMPONENT A FROM FREEZING

Waste Disposal Methods:CURED MATERIAL SHOULD BE BURIED (MFR). DISPOSE
OF IN ACCORDANCE W/LOCAL, STATE & FEDERAL REGULATIONS .

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.